Ideal switchgear for power distribution.
Power distribution equipment for electrical circuits. It integrates protection for connected equipment and personnel, while also offering a versatile design that can be assembled in different configurations according to project needs.
Description
The switchgear is divided into sections
Sections are made with tinned electrolytic copper busbars covered with heat-shrink tubing, insulators, bushings, insulating boots, and power cable terminals
Includes removable, electrically operated circuit breakers with vacuum bottle contacts
Manufactured with 12-gauge carbon steel for the structure and 14-gauge carbon steel for covers
Oven-cured electrostatic paint coating
Available in voltages from 4.16 kV to 24 kV
Features
Available operating voltages: 4.16 kV, 13.2 kV, 13.8 kV, and 24 kV
Interrupting capacities: 25 kA and 40 kA
Current capacity: 630 A, 1200 A, 2000 A, 3000 A (5 and 15 kV)
Control voltage: 110 VAC or VDC upon request
Benefits
High resistance of vacuum circuit breakers; they withstand 50 to 200 full fault-current interruptions at maximum capacity
Grounded safety barriers in the steel module to prevent accidental contact with primary voltage connections when removing the circuit breaker
Reduced maintenance of the vacuum circuit breaker
Can include up to 4 removable auxiliary drawers per vertical section
Offers high partial-discharge resistance and fire-retardant properties
Standardized design that reduces production and delivery time
Applicable Standards
ANS/IEEE 37.20.2IEC 61008
EMA SG-5
METAL CLAD
